Sirui A1005 Tripod with Y-10 Ball Head (Aluminum)

The A1005 Tripod with Y-10 Ball Head from Sirui has 5-section aluminum legs that fold a full 180° in reverse to make it a compact 14″ length for storage and transport. Fully extend the center column for a maximum working height of 55.1″. The 22 lb load capacity allows you to attach a pro DSLR with a large telephoto lens.

A hook at the bottom of the center column can be used to hang a small sandbag or camera bag to stabilize the tripod. Variable leg angles allow a minimum height of 10.2″, and you can reverse the center column to get even closer to the ground. The tripod’s leg detaches and converts into a monopod that increases in height by attaching the center column.

The included Y-10 ball head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control movement of the ball and 360° panning base. Place your camera at a  90° angle using the ball head’s single-cut notch.

• The 2.7 lb tripod has a 10.2 to 55.1″ working height range and a load capacity of 22 lb
• The aluminum legs have 5 sections that fold in reverse to a compact 14″ for storage and transport
• Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook on the bottom of the center column
• The tripod’s detachable leg converts to a monopod and the height increases when the leg is attached to the center column
• The Y-10 ball head has separate knobs for pan and tilt, plus a single cut notch for angling the camera 90°