-11%
Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable
Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable - Image 2
Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable - Image 3
Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable - Image 4
Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable - Image 5

Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable

Key Features

  • Desktop 1×2 USB Type-C Audio Interface
  • Large-Diaphragm Cardioid Condenser Mic
  • Shockmount Inhibits Vibration Noise
  • Pop Filter Controls Vocal Plosives

Payment options available:

  • Credit Cards/Debit Cards/Netbanking.
  • UPI and Wallet Payments.
  • EMI options.
  • Direct Bank Transfer.

Country of Origin : Australia

₹35,499.00 ₹39,700.00

Features

NT1

  • Large 1″ capsule with gold-plated membrane
  • Cardioid polar pattern rejects off-axis sound behind the mic
  • Internal Rycote Lyre-based capsule shock-mounting system
  • Ultralow-noise transformerless circuitry
  • State-of-the-art, surface-mount electronics
  • Heavy-duty matte black finish
  • Gold-plated XLR output connector
  • Operates on 24 or 48 VDC phantom power
  • Includes shockmount, pop filter, dust cover, and XLR mic cable

AI-1

  • Desktop USB audio interface with low-noise Class-A discrete preamplifier
  • Sampling rate of up to 96kHz/24-bit
  • One combo XLR-1/4″ combo input
  • Two balanced 1/4″ monitor outputs
  • One discrete, studio-quality headphone output
  • Phantom power for condenser microphones
  • Zero-latency monitor mode
  • USB bus powered
  • USB Type-C connector for future proof operation
  • Rugged body with Satin Black Finish
  • Class compliant—no drivers required
  • Includes Ableton Live Lite
  • Includes USB cable
SKU: Rode-NT1-AI1-Kit Category: Tags: , , , ,

Rode NT1-KIT Large-Diaphragm Cardioid Condenser Microphone Specs

Microphone
Primary Applications Live Sound, Studio Recording
Form Factor Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources Vocals, Speech/Voice Over, Instrument
Sound Field Mono
Operating Principle Pressure Gradient
Capsule 1 x Condenser
Diaphragm 1″ / 25.40 mm
Polar Pattern Cardioid
Orientation Side Address
Circuitry Solid-State (JFET)
Pad None
High-Pass Filter None
Tone Adjustment None
Gain Adjustment None
Indicators None
On-Board Controls None
Windscreen None
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 132 dB SPL
Impedance 100 Ohms
Sensitivity -29 dBV/Pa at 1 kHz
Output Level 8 mV (Max, 1 kHz)
Dynamic Range 128 dB
Signal-to-Noise Ratio 90 dB A-Weighted
Equivalent Noise Level 4.5 dB A-Weighted
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
Headphone Connector None
Power
Operating Voltage 24 V (Phantom Power)
48 V (Phantom Power)
Physical
Color Black
Mounting Shockmount (Included)
Included Case None
Included Filters Pop Filter
Construction Material Aluminum
Dimensions ø: 2 x L: 7.4″ / ø: 5 x L: 18.7 cm
Weight 15.5 oz / 440 g
Packaging Info
Package Weight 4.95 lb
Box Dimensions (LxWxH) 10.5 x 8.25 x 6.75″

Rode AI-1 Studio-Quality USB Audio Interface Specs

Signal Processing
Gain/Trim Range Inputs:
0 to 45 dB
High-Pass Filter None
Solo/Mute None
Connectivity
Analog Audio I/O 1 x Combo XLR-1/4″ TRS Mic/Line Input
2 x 1/4″ TRS Balanced Line Output
1 x 1/4″ TRS Headphone Output
Phantom Power 48 V
Digital Audio I/O None
Host Connection / USB USB Type-C
Host Connection Protocol Not Specified by Manufacturer
USB (Non-Host) None
Sync I/O None
Network I/O None
MIDI I/O None
Performance
Frequency Response 20 Hz to 20 kHz ±1 dB
Maximum Output Level Monitor Outputs:
-6 dBu
Headphone Output Power 24 mW into 32 Ohms
245 mW into 300 Ohms
Impedance Hi-Z Inputs:
0.9 Megohm
Mic Inputs:
1.3 Kilohms
Dynamic Range 104 dBu
EIN -128 dBA
Digital Audio
Sample Rates 44.1 / 48 / 88.2 / 96 kHz
Sample Rate Conversion None
Bit Depths 24-Bit
Latency Zero-Latency Direct Monitoring
Clocking Internal:
<nbsp;></nbsp;>
Compatibility
OS Compatibility macOS 10.10 or Later
Windows 7 or Later
*As of November, 2021: Check with manufacturer for the most up-to-date compatibility
Included Software None
Included Plug-Ins None
Supported Drivers/API & Plug-Ins macOS Class-Compliant (No Driver Needed)
Windows Class-Compliant (No Driver Needed)
Power
Power Requirements USB Bus Power
Physical
Form Factor Desktop
Display None
Channels of I/O 1 Input / 2 Output
Built-In DSP None
Maximum Sampling Rate 96 kHz / 24-Bit
Number of Microphone Preamps 1 Preamp
Built-In Microphone None
Input Level Adjustment 2 x Knob
Expansion Slots None
Dimensions 4.9 x 3.9 x 1.5″ / 124 x 100 x 38 mm
Weight 19.8 oz / 561.3 g

Manufacturer & Address : Rode 107, Carnavon St., Silverwater NSW 2128, Australia.
Importer or Packer : Trimac Products Pvt. Ltd., D-40, DSIIDC Packaging Complex, Kirti Nagar, New Delhi 110015..
Country of Origin : Australia.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable”


There are no reviews yet.

Related products

Brands Carousel